The BEST Coin Ring Folding AND Finishing Tools for coin ring makers!

By popular demand from many coin ring makers, now you can get the total package to begin folding, continue folding, and finishing off all of your coin rings with this complete Coin Ring Folding AND Finishing Kit; which includes the improved Set of hardened stainless steel Universal Stabilizer Folding Cones, AND the Rounding, Finishing, and Polishing Mandrel Set for ultra smooth and professional-looking coin rings.

This kit is a great compliment to my universal and stabilizing reduction dies to begin the coin ring-making process.

 ss-folding-cone-pic9-copy

*** An improvement over the Folding Cones made out of softer phenolic material, these new folding cones are made to last as they are made from hardened stainless steel (and when wrapped with pipe thread seal tape won’t damage your coins’ detail), the new material allows the coin to glide against the folding cone easier without getting “stuck” and eating into the cone as was often the case with the soft phenolic folding cones.
For a complete detailed description of the improved universal Stabilizer folding cones, click on this link here:

 

*** With the new rounding, finishing and polishing mandrel set, you can now obtain the best, most rounded and uniform high quality smooth, shiny, and even finish to the NON-REEDED edges of your coin rings by quickly getting rid of those unsightly, uneven, flat edges.

No more having to use nail buffing files, sanding by hand, using steel round files or de-burring tools to finish your rough coin ring edges… nothing else performs better in completing this critical aspect of coin ring-making!
For a complete detailed description of the Rounding,Finishing, and Polishing Mandrel Set for professional-looking coin rings, click on the link below:
https://www.etsy.com/listing/267370914/coin-ring-roundingfinishingpolishing?ref=shop_home_active_7

 

Visit my online Shop to grab a Coin Ring Folding AND Finishing Tool Set

 

*** Here are a few reviews from folks that have used these tools: ***

— ”Hey Martin, when you contacted me and said that you had Folding Cones made out of an improved type of material that you wanted me to test out, I was curious and excited to see what kind of results I would get with them. After having done numerous Half Dollar and Morgan Dollar coin rings, I can definitely say that I like this material better than the other cones that I had previously purchased mainly because the material of your newer cones seems tougher; but most importantly, your new material allows the coin to move down the sides of the folding cones easier without getting hung up and chewing into the cones as much as with the other material. I previously used the delrin balls that I had to make the first press into the coins but have since switched over to your stainless starter cone, which saves the folding cones from unnecessary wear and tear. Overall the new folding cones are holding up nicely after having now made over 30 coin rings with them. Thanks, and great job!” — Jerry R. of Memorable Coin Rings

 

— “Fast shipping and well made kit. The starting cone will likely last forever and using it makes the first fold more self-assured, it minimizes wear on the synthetic cones and removes the worry about having to replace them. It’s worth noting that it would be great if every company which offered products was like this one and they were constantly looking for ways to improve on and lengthen the life span of their products. As a business model, it would elevate creativity and quality above planned obsolescence. It would obviously be more profitable to make the tools inexpensively and let the ring makers use them until they wear out and then have to replace them. The tools bought here are not only designed to enable the making of professional level rings but to last as long as possible, saving the ring makers from repeat spending.”
— Gene (“if6ws929”) review left on May 11, 2016
5 out of 5 stars

 

— “Hello Martin. I received and used your starter cone and what a difference having the right tool for the job can make! I purchased your Stabilizer dies and can now use this starter cone because of the new lower profile-fit with my Durston ring stretcher. This will make my folding cones that I purchased from you last so much longer, thanks!” — Mark T.

 

(Coins and ring sizer machine pictured are not included and are used for reference only).
*** SAFETY FIRST ***

— CAUTION! This is a small part and can be considered a choking hazard. Please keep away from children and pets!
— Always wear safety glasses.
— Keep fingers, long hair, and loose clothing away from any pinch points or open flame.

 

======================================

 

•To view all of my videos on coin ring tips and tricks, subscribe to my YouTube channel by typing “CoinRingUSA” in the YouTube search box.

•To see all of the coin ring-making tools that I have to offer, please visit: www.CoinRingUSA.com

Thanks, and here’s to your coin ring-making success!

Meet the owner of CoinRingUSA

Martin

The ULTIMATE Way to Get Smooth and Rounded Edges to the Rough Cut Side of Coin Rings!

Clean up and smooth-out your coin rings’ rough cut edges!

There’s a lot of information available today on how to fold and reduce coins to make coin rings, but there’s almost no information on HOW to actually go about and professionally finish and polish the thinner, non-reeded cut edge of your coin rings.

This side of the coin ring was once the inner portion of the coin prior to the forging process, and it can be very difficult to get a smooth-looking finish due to the sharp and uneven edges that are present.

Polishing Mandrel Set pic ROUGH COPY

Rough and uneven coin ring edge BEFORE using the Finishing & Polishing Mandrel Set

An easy solution to this problem is to utilize a Set of what are called “Finishing and Polishing Mandrels”; which will give you that high-quality smooth finish and shine to the NON-REEDED edges of your coin rings by getting rid of those unsightly, uneven, sharp edges WITHOUT using nail buffing files, having to sand by hand, using steel round files, or even deburring tools.

This Polishing Mandrel Set will finish and polish any coin ring from an approximate US size of 5, up to a US size of 14.

The Kit comes with a German-made nickel plated steel shank complete with 3 interchangeable Tapered Mandrel Cones in varying sizes:

Small — (fits ring sizes of approx. 5-8),
Medium — (fits ring sizes of approx. 8.5-11), and
Large — (fits ring sizes of approx. 11-14).

Polishing Mandrel pic2COPY
The advantage to using the finishing and polishing mandrels is that as the ring is spinning, the power drill acts like a small lathe, providing a much more uniform finish to the ring than can be achieved with either hand-sanding, using a nail buffing file, a steel round-file, or even a small rotary tool such as a Dremel.

 

*** TO WATCH A VIDEO TUTORIAL ON THIS PROCESS, WATCH THE VIDEO BELOW ***

 

PROCESS:

1.) Determine which size Polishing Tapered Mandrel fits your completed coin ring, and slide the coin ring on to it.

2.) Place the Mandrel bit into your power drill and tighten.

3.) Adjust the coin ring until it’s well-balanced with no “wobbling” on the Mandrel with your power drill on, and then expand the Mandrel by tightening the Stainless Steel Phillips head set screw at the top which holds the coin ring securely in place.

4.) Begin on the outer edge of the coin ring with the coarser 100 Grit sandpaper and work your way around to the inner edge of the coin ring; making sure that ONLY the corner tip of the sandpaper is making contact with the unfinished inner, top, and outer edges of your coin ring to prevent damage to the rings’ detail.

5.) Continue to work the inner, top, and outer edges of the NON-REEDED side using the finer Grits of sandpaper as you go; finishing with “0000” Steel Wool. You can also use the steel wool and LIGHTLY go over the inner and the outer detail of the coin ring before you either polish it with a jeweler’s cloth or after you’ve put a patina (antique-looking) finish on the ring.

6.) The final step is to use a jeweler’s cloth to both buff and finish-polish your coin ring.

Your ring will now have a highly-smoothed, rounded, and polished edge on the NON-REEDED side that is not often seen on coin rings!

Smooth and even coin edge AFTER using the Finishing & Polishing Mandrel Set

Smooth and even coin ring edge AFTER using the Finishing & Polishing Mandrel Set

 

Another example below:

Before AND After COPY of finished coin rings

* Click on the photo to enlarge to see the differences in the edges of this Walking Liberty Half Dollar *

Other materials needed: a power drill, 3 different grits of sandpaper (150 Grit, 400 Grit, and 600 Grit ideally), some “0000” Steel Wool, and a jeweler’s polishing cloth to complete this process. Those items can be purchased from Amazon.com; at a big box store like Home Depot, or any local hardware store inexpensively.

 

*** SAFETY FIRST ***
– Always wear safety glasses and work gloves.
– Always use caution when working with any power tools and electricity.
– Keep fingers, long hair, and loose clothing away from any fast moving parts.