The BEST Coin Ring Folding AND Finishing Tools for coin ring makers!

By popular demand from many coin ring makers, now you can get the total package to begin folding, continue folding, and finishing off all of your coin rings with this complete Coin Ring Folding AND Finishing Kit; which includes the improved Set of hardened stainless steel Universal Stabilizer Folding Cones, AND the Rounding, Finishing, and Polishing Mandrel Set for ultra smooth and professional-looking coin rings.

This kit is a great compliment to my universal and stabilizing reduction dies to begin the coin ring-making process.

 ss-folding-cone-pic9-copy

*** An improvement over the Folding Cones made out of softer phenolic material, these new folding cones are made to last as they are made from hardened stainless steel (and when wrapped with pipe thread seal tape won’t damage your coins’ detail), the new material allows the coin to glide against the folding cone easier without getting “stuck” and eating into the cone as was often the case with the soft phenolic folding cones.
For a complete detailed description of the improved universal Stabilizer folding cones, click on this link here:

 

*** With the new rounding, finishing and polishing mandrel set, you can now obtain the best, most rounded and uniform high quality smooth, shiny, and even finish to the NON-REEDED edges of your coin rings by quickly getting rid of those unsightly, uneven, flat edges.

No more having to use nail buffing files, sanding by hand, using steel round files or de-burring tools to finish your rough coin ring edges… nothing else performs better in completing this critical aspect of coin ring-making!
For a complete detailed description of the Rounding,Finishing, and Polishing Mandrel Set for professional-looking coin rings, click on the link below:
https://www.etsy.com/listing/267370914/coin-ring-roundingfinishingpolishing?ref=shop_home_active_7

 

Visit my online Shop to grab a Coin Ring Folding AND Finishing Tool Set

 

*** Here are a few reviews from folks that have used these tools: ***

— ”Hey Martin, when you contacted me and said that you had Folding Cones made out of an improved type of material that you wanted me to test out, I was curious and excited to see what kind of results I would get with them. After having done numerous Half Dollar and Morgan Dollar coin rings, I can definitely say that I like this material better than the other cones that I had previously purchased mainly because the material of your newer cones seems tougher; but most importantly, your new material allows the coin to move down the sides of the folding cones easier without getting hung up and chewing into the cones as much as with the other material. I previously used the delrin balls that I had to make the first press into the coins but have since switched over to your stainless starter cone, which saves the folding cones from unnecessary wear and tear. Overall the new folding cones are holding up nicely after having now made over 30 coin rings with them. Thanks, and great job!” — Jerry R. of Memorable Coin Rings

 

— “Fast shipping and well made kit. The starting cone will likely last forever and using it makes the first fold more self-assured, it minimizes wear on the synthetic cones and removes the worry about having to replace them. It’s worth noting that it would be great if every company which offered products was like this one and they were constantly looking for ways to improve on and lengthen the life span of their products. As a business model, it would elevate creativity and quality above planned obsolescence. It would obviously be more profitable to make the tools inexpensively and let the ring makers use them until they wear out and then have to replace them. The tools bought here are not only designed to enable the making of professional level rings but to last as long as possible, saving the ring makers from repeat spending.”
— Gene (“if6ws929”) review left on May 11, 2016
5 out of 5 stars

 

— “Hello Martin. I received and used your starter cone and what a difference having the right tool for the job can make! I purchased your Stabilizer dies and can now use this starter cone because of the new lower profile-fit with my Durston ring stretcher. This will make my folding cones that I purchased from you last so much longer, thanks!” — Mark T.

 

(Coins and ring sizer machine pictured are not included and are used for reference only).
*** SAFETY FIRST ***

— CAUTION! This is a small part and can be considered a choking hazard. Please keep away from children and pets!
— Always wear safety glasses.
— Keep fingers, long hair, and loose clothing away from any pinch points or open flame.

 

======================================

 

•To view all of my videos on coin ring tips and tricks, subscribe to my YouTube channel by typing “CoinRingUSA” in the YouTube search box.

•To see all of the coin ring-making tools that I have to offer, please visit: www.CoinRingUSA.com

Thanks, and here’s to your coin ring-making success!

Meet the owner of CoinRingUSA

Martin